Brother DCP-130C Driver
Brother DCP-130C

Brother DCP-130C Driver Download and Manual For Windows and Mac

Brother DCP-130C Driver Download, Manual, Wireless Setup, Review, Installation, Software Download For Windows, Mac, and Linux – The Sibling The Brother DCP-130C Color Inkjet All-in-One gives premium quality, shade inkjet printing, shade scanning as well as PC-free shade copying in addition to Brother’s PhotoCapture Center function so you could print your images with amazing results. With this compact all-in-one unit, you could print images straight from the card, transfer images to your computer or print from your PictBridge made it possible for the electronic camera – all making use of intuitive controls.

Brother DCP-130C Driver
Brother DCP-130C

The Brother DCP-130C is 39x35x16cm and also light grey and also black in color. There are a total amount of 15 buttons all at the ideal side of the leading edge of the top along with a rather bad LED display that you constantly appear to be at the incorrect angle to see what it is stating. The front has 2 card slots along with a PictBridge one. It behaves to see a proper paper tray – instead of open shelf-printed outcomes are supplied face up on a rack just over the paper tray. The flatbed scanner has a landscape cover that needs 28cm to rise to the upright although there is no reason why to slip a sheet under the cover requires a raising of greater than a few centimeters. Books or magazines naturally need a larger raise.

The scanner is instead great as well as I was quite happy with the quality of all web pages that I downloaded to the PC. A fast means of evaluating the scanner is to use it as a stand-alone copier. Around 30 seconds for a color copy that varies hardly any from the original. A little quicker for a black copy yet once again fairly acceptable. This is a 4 ink and 4 cartridge device with decently sized cartridges that are easy to fit and also the advantage of solitary cartridges is that you never ever lose ink as if the yellow cartridge is empty you just should change the yellow. So much a fairly appropriate entry-level device the only minus being the poor solitary line LED display screen. However, it usually goes into a cleaning cycle as well as I do not imply simply when it is switched on and also this takes about two to three mins. If you just wish to copy a solitary page this is more than irritating. Currently, onto printing, I am pleased to claim printing times are much enhanced from those of last years set of products nevertheless times are still not terrific.

For printing the ubiquitous 200-word file in draft mode it is 12PPM as well as the more typical 1500 word document spread over 4 web pages it is 10PPM and the output for both is grey so actually only helpful for proofing. Printing in typical mode generates near black output, however, is rather slower. Now into photo output and normal readers will certainly remember the horrible time taken to print an A4 indeterminate print with last years design. This year a massive enhancement it only takes 9minutes, still poor but on the exact same planet as various other business. To print four 9x13cm photos on an A4 sheet must take about the exact same time. Despite the fact that I chose indeterminate as well as clicked indeed at the ‘this may spend some time’ message what I obtained was four 9x13cm photos all with boundaries and this took about 8minutes. So it will only print an A4 sheet with a solitary photo borderless and also it will just do this in the center top quality of the photo, when you choose finest it automatically unticks borderless. Brother DCP-130C Driver Download and Manual For Windows and Mac

Recommended: Brother DCP-120C and Brother DCP-110C Drivers Download

Os CompatibleSpecificationHOW TO SETUPDOWNLOAD LINK

Brother DCP-130C Operating System Compatibility

Windows XP 32-bit, Windows XP 64-bit, Windows 7 32-bit, Windows 7 64-bit, Windows Vista 32-bit, Windows Vista 64-bit, / macOS 10.13.x, macOS 10.12.x, Mac OS X 10.11.x, Mac OS X 10.10.x, Mac OS X 10.9.x, Mac OS X 10.8.x, Mac OS X 10.7.x, Mac OS X 10.6.x

Brother DCP-130c Specs

Printer
Printing Technology Color Inkjet with True2Life technology
Maximum Resolution 6000 x 1200dpi
Minimum Ink Droplet Size 1.5 picoliters
Ink Type Innobella inks
Ink Palette CMYK
Ink Cartridge Configuration 4 individual ink cartridges
Print Speed Monochrome: 25ppm
Color: 20ppm
Input Buffer 16MB
Printer Duty Cycle Not Specified by Manufacturer
Print Archival Life Not Specified by Manufacturer
Scanner
Image Sensor Linear CIS
Optical Resolution 600 x 2400dpi
Interpolated Resolution 19200 x 19200dpi
Color Depth 36-bit RGB
Dynamic Range Not Specified by Manufacturer
Light Source Cold Cathode Lamp
Reflective Scan Area 8.5 x 11.7″
Transparency Scan Area No
Fax
Modem Speed Not Applicable
Transmission Speed Not Applicable
Transmission/Reception Memory Not Applicable
Fax Resolution Not Applicable
Dialing Options Not Applicable
Receiver Options Not Applicable
Copier
Copy Speed Monochrome: 18cpm
Color: 16cpm
Copy Resolution 1200 x 600dpi
Reduction/Enlargement 25 – 400% (1% increments)
Copy Features 1-99 copies, Brightness/Contrast adjust
Paper Handling
Maximum Paper Width 8.5″
Maximum Printable Area 8.5 x 11″ Borderless
Paper Sizes Letter, Legal, Executive, A4, A5, A6, JIS_B5, Envelopes (commercial No.10, DL, C5, Monarch, JE4), Photo 4 x 6″, Index card, Post card
Borderless Photo Sizes Letter, A4, A6, Photo 4 x 6″, Index Card, Post Card
Paper Types Plain paper, Inkjet paper (coated paper), Glossy paper, Transparencies, Envelopes
Maximum Paper Thickness 0.28mm (240gsm)
Paper Capacity 100 Sheets (plain paper)
Special Media Support No
Connectivity
Computer Interface USB 2.0
Compatible Memory Cards CompactFlash
Memory Stick/Memory Stick Pro
MultiMediaCard
Secure Digital Card
xD-Picture Card (Type M & H)
Direct Print Capable Yes (PictBridge)
Network Capable No
PostScript Support No
System & Software Requirements Windows System

  • Intel Pentium II or equivalent (Pentium 4 for XP x64)
  • 98SE, Me, 2000, XP, XP x64
  • 256MB RAM
  • 220MB Hard Disk Space
  • USB Interface
  • CD-ROM Drive (for software installation)

Macintosh System

  • PowerPC G3/G4/G5 & Intel Core; 350 MHz or better
  • Mac OS X (10.2.4 or later)
  • 128MB RAM
  • 200MB Hard Disk Space
  • USB Interface
  • CD-ROM Drive (for software installation)
Physical
Status Display Alphanumeric LCD (16 characters x 1 line) & Indicator LEDs
Image Preview Display No
Front Panel Controls Power, Copy Options, Enlarge/Reduce, Copy Quality, Number of Copies, Menu, Up/+, Down/-, OK, Photo Capture, Scan, Ink, Start (Black/Color)
Power Requirements 120VAC; 50-60Hz
Dimensions (WxHxD) 15.7 x 5.9 x 14.2″ (398 x 150 x 360mm)
Weight 15.4 lb (7.0kg)

How To Install Brother DCP-130C For Windows:

  • If the drivers are already installed on your computer, uninstall them first before you install the new driver. To uninstall the current drivers, download the Uninstall Tool. To see how to download and use the Uninstall Tool,

  • Unplug the FAX/DCP/MFC from the AC outlet and disconnect your FAX/DCP/MFC from your computer if you already connected an interface cable.

  1. Make a temporary directory on your HDD to save the downloaded self-extracting file, e.g. C:\bront
  2. Click on the “Download” button and download the Brother DCP-130C Driver file.
  3. Double-click the file to extract it.
  4. You will find two folders: “Setupxxxx” (where xxx = model name) and “Data” in the folder created in Step 3.
  5. Open the “Setupxxxx\yyy” directory (xxxx = model name yyy = language name) and double click “Setup.exe” .
  6. The installation will start. Please follow the installation screen directions.

How To Install Brother DCP-130C For Mac:

  1. Download Brother DCP-130C Driver the target file to your Macintosh. Once downloaded, the Installer Disk Image will be mounted on your Desktop. You will find the installer package icon “xxxxxxxx.pkg” on the desktop. Note:
    If you don’t find the installer package icon, please extract the downloaded file “xxx.dmg” manually with the Macintosh “Disk Utility”. The “Disk Utility ” can be found in /Applications/Utilities. Using the “Disk Utility”, the Installer Disk Image can be mounted.
  2. Double click the installer package icon “xxxx.pkg”. Follow the instructions on the screen.
  3. Turn off and unplug the machine from the AC outlet and disconnect it from your Macintosh if you already connected an interface cable.
  4. Connect the USB interface cable to your Macintosh, and then connect it to the machine.
    Note:
    Do not connect the machine to a USB port on a keyboard or a non-powered USB hub.
  5. Plug the AC power cord into an AC outlet. Turn on the machine.
  6. The printer driver will be installed automatically.
  7. You need to make sure if the installation of the printer driver is complete.
  8. Select “System Preferences” from the Apple Menu.
  9. Click the “Print & Fax” icon.
  10. Check if your Brother machine is displayed in the “Printers” section.
  11. If your Brother machine is displayed, the setup is now complete.
    If your Brother machine is not displayed, try to disconnect and connect the USB interface cable to your Macintosh again. And then repeat the steps 8 – 10 to check if the installation of the printer driver is complete.

Brother DCP-130C Driver Download For Windows:

File Name: File Download
Brother DCP-130C Driver & Software Package Full
Brother DCP-130C Driver Add Printer Wizard 

 

Brother DCP-130C Driver Download For Mac:

File Name: File Download
Brother DCP-130C Driver CUPS Printer (Recommended)
Brother DCP-130C Driver Scanner (TWAIN)

Brother DCP-130C Driver Download For Windows and Mac:

Good news from the owner driver-brother.org, thus those who look for the download link for all in one Brother DCP-130C driver and full software of Brother DCP-130C, the download link is accessible, and no worry for the broken link as any link for any platform works properly. While downloading the software, to ensure that there is nothing wrong while using Brother DCP-130C Driver, you need to pay attention toward the installations.

Brother DCP-130C Drivers Download

Incoming search terms: